Aluminium alloys

Chemical composition (percentage of basic and additional elements in aluminium alloys) is given below in the tables of relevant standard.

Aluminium alloys according to DIN 1725 (part 5) standard

Si Fe Cu Mn Mg Cr Ni Zn Pb Sn Ti Each Total Ai
DIN226 8.0-11.0 1.0 max 2.0-3.5 0.10-0.50 0.10-o.50 0.10 max 0.30 max 1.20 max 0.20 max 0.10 max 0.15 max max 0.05 max 0.25 balance
DIN231 10.5-13.5 0.6-1.1 0.7-1.2 0.55 max 0.35 max 0.10 max 0.30 max 0.50 max 0.20 max 0.10 max 0.15 max max 0.05 max 0.25 balance
DIN230 11.0-13.0 1.0 max 0.10 max 0.40 max 0.05 max 0.10 max 0.15 max max 0.05 max 0.15 balance
DIN239 9.0-10.5 0.50 max 0.05 max 0.10-0.40 0.25-0.45 0.10 max 0.10 max max 0.05 max 0.15 balance
DIN260 10.5-13.5 0.6 0.8-1.5 0.35 0.9-1.5 0.7-1.3 0.35 0.20 max 0.05 max 0.15 balance


Aluminium alloys according to DIN EN 1676 standard

Si Fe Cu Mn Mg Cr Ni Zn Pb Sn Ti Each Total Ai
EN AB 43000 9.0-11.0 0.55 0.03 0.45 0.20-0.45 0.05 0.1 0.05 0.05 0.15 max 0.05 max 0.15 balance
EN AB 44000 10.0-11.8 0.40 0.03 0.10 0.45 0.07 0.15 max 0.05 max 0.15 balance
EN AB 45000 5.0-7.0 0.9 3.0-5.0 0.20-0.65 0.55 0.15 0.45 2.0 0.30 0.15 0.25 max 0.05 max 0.15 balance
EN AB 46000 8.0-11.0 0.6-1.1 2.0-4.0 0.55 0.15-0.55 0.15 0.55 1.2 0.35 0.25 0.20 max 0.05 max 0.15 balance
EN AB 47000 10.5-13.5 0.7 0.9 0.05-0.55 0.35 0.10 0.3 0.55 0.20 0.10 0.15 max 0.05 max 0.15 balance
EN AB 48000 10.5-13.5 0.6 0.8-1.5 0.35 0.9-1.5 0.7-1.3 0.35 0.20 max 0.05 max o.15 balance


Aluminium alloys according to DIN EN 573-3 standard

Si Fe Cu Mn Mg Cr Ni Zn Pb Sn Ti Each Total Ai
EN AW 8112 0.50 max 1.0 max 0.5 max 0.6 max 1.2 max 0.2 max 1.0 max 0.2 max balance


Aluminium alloys according to JIS H 2118 standard

Si Fe Cu Mn Mg Cr Ni Zn Pb Sn Ti Each Total Ai
ADC 12 9.6-12.0 0.9 max 1.5-3.5 0.5 max 0.3 max 0.1 max 0.5 max 1.0 max 0.1 max 0.2 max max 0.05 max 0.25 balance


Aluminium alloys according to NF A-57-703 standard

Si Fe Cu Mn Mg Cr Ni Zn Pb Sn Ti Each Total Ai
A-S9U3 8.0-10.0 0.7-1.0 2.7-3.5 0.1-0.5 0.3 max 0.3 max 1.2 max 0.2 max 0.1 max o.15 max max 0.05 max 0.25 balance


Aluminium alloys according to GOST 1583-93 standard

Si Fe Cu Mn Mg Cr Ni Zn Pb Sn Ti Each Total Ai
АК 7 6.0-8.0 1.0 1.5 0.2-0.6 0.2-0.55 0.3 0.5 0.15 3 balance
АК 9 8.0-11.0 0.8 1.0 0.2-0.5 0.25-0.45 0.3 0.5 0.15 2.4 balance
АК 12 10.0-12.0 0.7 0.6 0.5 0.1 0.3 0.1 0.1 2.1 balance
АК 12 М2 11.0-13.0 06-0.9 1.8-2.5 0.5 0.2 0.3 0.8 0.15 0.1 0.2 0.05 2.1 balance
АК12М2МгН 11.0-13.0 0.7 1.5-3.0 0.3-0.6 0.85-1.35 0.2 0.8-1.3 0.5 0.1 0.02 0.05-0.20 0.05 1.2 balance